Элементы оглавления не найдены.
ДОМАШНЯЯ КОНТРОЛЬНАЯ РАБОТА
По МДК 1.4
«Телекоммуникационные протоколы»
для студентов ФЗО СПО специальностей
11.02.11 «Сети связи и системы коммутации»
. | ||||
Хабаровск 2016
Г.А. ЛитвакДомашняя контрольная работа по дисциплине «Телекоммуникационные протоколы» для студентов среднего профессионального образования заочной формы обучения специальностей 11.02.11 «Сети связи и системы коммутации»
Хабаровск: ХИИК «СибГУТИ», 2016. – 32 с.
Домашняя контрольная работа содержит задания по курсу дисциплины «Телекоммуникационные протоколы» и методические указания к выполнению каждого задания, перечень литературы в которой можно найти изучаемые темы.
Для студентов заочной формы обучения СПО.
Рецензент:
Тухватулина Е.А– преподаватель первой категории кафедры «АЭС и ЦТРВ» ХИИК «СибГУТИ»
Рассмотрено на заседании кафедры «Автоматическая электросвязь и цифровое телерадиовещание»
Протокол № _____ «____»_____________ 2016 г.
Зав. кафедрой АЭС и ЦТРВ __________________(Клепиков С. И.)
Утверждена на заседании Методического совета
Протокол №______________ от « » ___________ 2016г.
Зам. директора по УР _____________ /О. А. Капитунова/
СОДЕРЖАНИЕ
Общие указания | |
Контрольное задания №1 | |
Контрольное задание №2 | |
Методические указания для выполнения задания №1 | |
Методические указания для выполнения задания №2 | |
Приложение 1 Форматы протокола DSS-1 | |
Приложение 2 Форматы протокол ISUP | |
Литература |
ОБЩИЕ УКАЗАНИЯ
Контрольное задание состоит из двух объемных заданий, в каждом задании по десять вариантов. Студент должен выполнить все задания своего варианта. Вариант определяется по последней цифре номера зачетной книжки студента. Рассшифровка трейсов задания должна осуществляться согласно форматов протоколов сигнализации DSS-1,ISUP, с обоснованными пояснениями.
ОФОРМЛЕНИЕ КОНТРОЛЬНОГО ЗАДАНИЯ
Работа должна быть аккуратно оформлена. Надо придерживаться следующих правил:
1. Задания рекомендуется выполнять том же порядке, который указан в методическом указании по выполнению заданий.
2. Перед выполнением каждого задания необходимо написать трейс согласно варианта.
3. Не допускайте, пожалуйста, небрежного выполнения рисунков и пояснений.
4. В конце работы привести список источников, которыми Вы пользовались, дату окончания работы и подпишите ее.
5. Работу необходимо выполнить на формате А4.
6. Рецензирование работы выполняет ПЦК СССК СибГУТИ.
7. Если в работе имеются отмеченные рецензентом ошибки, их необходимо исправить.
8. Работа должна быть зачтена прежде, чем Вы будете сдавать зачет по курсу.
Если работа не зачтена, то студент выполняет ее заново полностью.
КОНТРОЛЬНЫЕ ЗАДАНИЯ
Задание №1.Абонентская цифровая сигнализация DSS-1. Форматы сообщений. Типы сообщений. Параметры сообщений. Расшифровка трейса протокола DSS-1.
Цель работы:Расшифровать трейс согласно формата 2 и 3 уровня сигнализации DSS-1.
1. Задание к работе:
Согласно варианта расшифровать протокол DSS-1 для стационарных сетей в формате протокола DSS-1 (для расшифровки используйте форматы 2 и 3 уровня, представленные в приложении 1)
Вариант 1. SETUP, Calling # 23974, Called # 14600
Layer 2 - Data Link Layer
Address field
00.......0EA0
......0.C/R = COMMAND
000000..SAPI = 0 Call control procedures
01.......1EA1
1100101.TEI = 01 Unautomatic assignment
Control field
0E.......0I Information
0001000.N(S) = 8
08.......0P
0000111.N(R) = 7
Layer 3 - Network Layer
08Protocol discriminator = Q.931
01....0001Call Reference Length = 1
020.......Flag = ORIGINATOR
.0000010Call Reference Value = 2
050.......E
.0000101Message type = SETUP
04Info Element = BEARER CAPABILITY
04Length = 4 octets
891.......EXT
.00.....Coding standard = CCITT
...01001Info transfer capability = restricted digital info
901.......EXT
.00.....Transfer mode = Circuit mode
...10000Info transfer rate = 64 kbit/s
210.......EXT
.01.....Layer 1 ID
...00001User info layer 1 protocol = CCITT V.110 & X.30
8F1.......EXT
.0......Synchronous/Asynchronous = Synchronous data
..0.....Negotiation = In-band negotiation not possible
...01111User rate = 56 kbit/s V.6
6CInfo Element = CALLING PARTY NUMBER
07Length = 7 octets
000.......EXT
.000....Type of number = Unknown
....0000Numbering plan = Unknown
801.......EXT
.00.....Presentation indicator = Presentation allowed
...000..Spare bit(s)
......00Screening indicator = User provided, not screened
32 33 39 37
34Number digits = 23974
70Info Element = CALLED PARTY NUMBER
06Length = 6 octets
811.......EXT
.000....Type of number = Unknown
....0001Numbering plan = ISDN/telephony numbering plan
31 34 36 30
30Number digits = 14600
Вариант 2 . SETUP ACKNOWLEDGE
Layer 2 - Data Link Layer
Address field
02.......0EA0
......1.C/R = COMMAND
000000..SAPI = 0 Call control procedures
CB.......1EA1
1100101.TEI = 101 Automatic assignment
Control field
I Information
0000000.N(S) = 0
02.......0P
0000001.N(R) = 1
Layer 3 - Network Layer
08Protocol discriminator = Q.931
01....0001Call Reference Length = 1
811.......Flag = DESTINATION
.0000001Call Reference Value = 1
0D0.......E
.0001101Message type = SETUP ACKNOWLEDGE
18Info Element = CHANNEL IDENTIFICATION
01Length = 1 octet
8A1.......EXT
.0......Interface identifier present = Interface implicitly
identified
..0.....Interface type = Basic
...0....Spare bit(s)
....1...Indicated channel = Exclusive
.....0..D-channel = False
......10Info channel = B2 channel
Вариант 3. INFORMATION, Called # 1
Layer 2 - Data Link Layer
Address field
00.......0EA0
......0.C/R = COMMAND
000000..SAPI = 0 Call control procedures
CB.......1EA1
1100101.TEI = 101 Automatic assignment
Control field
I Information
0000001.N(S) = 1
02.......0P
0000001.N(R) = 1
Layer 3 - Network Layer
08Protocol discriminator = Q.931
01....0001Call Reference Length = 1
010.......Flag = ORIGINATOR
.0000001Call Reference Value = 1
7B0.......E
.1111011Message type = INFORMATION
70Info Element = CALLED PARTY NUMBER
02Length = 2 octets
811.......EXT
.000....Type of number = Unknown
....0001Numbering plan = ISDN/telephony numbering plan
31 Number digits = 1
Вариант 4. CALL PROCEEDING
Layer 2 - Data Link Layer
Address field
02.......0EA0
......1.C/R = COMMAND
000000..SAPI = 0 Call control procedures
CB.......1EA1
1100101.TEI = 101 Automatic assignment
Control field
I Information
0000001.N(S) = 1
0C.......0P
0000110.N(R) = 6
Layer 3 - Network Layer
08Protocol discriminator = Q.931
01....0001Call Reference Length = 1
811.......Flag = DESTINATION
.0000001Call Reference Value = 1
020.......E
.0000010Message type = CALL PROCEEDING
Вариант 5. ALERTING
Layer 2 - Data Link Layer
Address field
02.......0EA0
......1.C/R = COMMAND
000000..SAPI = 0 Call control procedures
CB.......1EA1
1100101.TEI = 101 Automatic assignment
Control field
I Information
0000010.N(S) = 2
0C.......0P
0000110.N(R) = 6
Layer 3 - Network Layer
08Protocol discriminator = Q.931
01....0001Call Reference Length = 1
811.......Flag = DESTINATION
.0000001Call Reference Value = 1
010.......E
.0000001Message type = ALERTING
Вариант 6
******** LAPD128 (LAPD)
******** INFORMATION (I)
- - - - - --0 Address Field Extension Bit (EA) : 0
- - - - - -1- Command-Bit (C) : 1 = command from network to user
000000- - Service access point identifier (SAPI) : 0
-- - - - - -1 Address Field Extension Bit (EA) : 1
0000001- Terminal endpoint identifier (TEI) : 1
1010011 - Send Sequence Number (NS) : 83
- - - - - --0 Point Bit (P) : 0 = no response frame needed
1011001- Send Sequence Number (NS) : 89
********GSM 08.58 – RSL (V 6.2.0) (GSM_0858)
- - - - - --0 Transparent Bit (T-BIT) : 0h
0000110- Message Discriminator (MD) : 6h = Common Management
Messages (CCM)
******** GSM 08.58 – CCM (V 6.2.0) (GSM0858_CCM)
********IMMEDIATE ASSIGN COMMAND (IMME_ASS_CMD)
********Channel Number (CHA_NO)
- - - - -000 Timeslot Number (TN) : 0
10010- - - Channel Type (CHA_TYPE) : 18 = Downlink CCCH (PCH+AGCH)
********Full Immediate Assign Information (FULL_IMME_ASS_INFO)
********Layer 3 Information (L3_INFO) : 31 06 3F…………… 2B 2B 2Bh
Вариант 7
******** LAPD128 (LAPD)
******** INFORMATION (I)
- - - - - --0 Address Field Extension Bit (EA) : 0
- - - - - -0- Command-Bit (C) : 0 = command from network to user
000000- - Service access point identifier (SAPI) : 0
-- - - - - -1 Address Field Extension Bit (EA) : 1
0000001- Terminal endpoint identifier (TEI) : 1
1100111 - Send Sequence Number (NS) : 103
- - - - - --0 Point Bit (P) : 0 = no response frame needed
0001100- Send Sequence Number (NS) : 12
********GSM 08.58 – RSL (V 6.2.0) (GSM_0858)
- - - - - --1 Transparent Bit (T-BIT) : 1h
0000001- Message Discriminator (MD) : 1h = Radio Link Layer
Management Messages (RLLM)
******** GSM 08.58 – RLLM (V 6.2.0) (GSM0858_RLLM)
******** DATA INDICATION (DIND)
******** Channel Number (CHA_NO)
- - - - -001 Timeslot Number (TN) : 1
01000- - - Channel Type(CHA_TYPE) : 8 = SDCCH/8 + ACCH; Subchannel=0
********Link Identifier (LINK_ID)
- - - - -000 Service Access Point Identifier (SAPI) : 0h = SAPI 0 (0)
- -0- - - - - NA (NA) : 0h = applicable for this message
00- - - - - - Channel Type (CHA_TYPE) : 0h = main signaling channel FACCH
or SDCCH (FACCH/SDCCH)
********Layer 3 Information (L3_INFO)
******** Data (DATA) : 05 5Bh
********GSM 04.08 – DTAP (V 6.4.2) (GSM_0408)
********<General Fields> (GENERAL_FIELDS)
- - - -0101 Protocol Discriminator (PD) : 5h = Mobility Management (MM)
********GSM 04.08 – MM (V 6.4.2) (GSM0408_MM)
******** TMSI REALLOCATION COMPLETE (TMSI REALLOC COMP)
Вариант 8
******** LAPD128 (LAPD)
******** INFORMATION (I)
- - - - - --0 Address Field Extension Bit (EA) : 0
- - - - - -0- Command-Bit (C) : 0 = command from network to user
000000- - Service access point identifier (SAPI) : 0
-- - - - - -1 Address Field Extension Bit (EA) : 1
0000001- Terminal endpoint identifier (TEI) : 1
1011000 - Send Sequence Number (NS) : 88
- - - - - --0 Point Bit (P) : 0 = no response frame needed
1010011- Send Sequence Number (NS) : 83
********GSM 08.58 – RSL (V 6.2.0) (GSM_0858)
- - - - - --0 Transparent Bit (T-BIT) : 0h
0000100- Message Discriminator (MD) : 4h = Dedicated Channel
Management Messages (DCM)
********GSM 08.58 – DCM (V 6.2.0) (GSM0858_DCM)
********CHANNEL ACTIVATION ACKNOWLEDGE
(CHANNEL_ACTIVATE_ACK)
******** Channel Number (CHA_NO)
- - - - -001 Timeslot Number (TN) : 1
01000- - - Channel Type(CHA_TYPE) : 8 = SDCCH/8 + ACCH; Subchannel=0
********Frame Number (FRAME_NO)
11000- - - T1 (T1) : 18h
********T3 (T3) : 21h
- - -10001 T2 (T2) : 11h
Вариант 9
******** LAPD128 (LAPD)
******** INFORMATION (I)
- - - - - --0 Address Field Extension Bit (EA) : 0
- - - - - -1- Command-Bit (C) : 1 = command from network to user
000000- - Service access point identifier (SAPI) : 0
-- - - - - -1 Address Field Extension Bit (EA) : 1
0000001- Terminal endpoint identifier (TEI) : 1
1011011 - Send Sequence Number (NS) : 91
- - - - - --0 Point Bit (P) : 0 = no response frame needed
1011101- Send Sequence Number (NS) : 93
********GSM 08.58 – RSL (V 6.2.0) (GSM_0858)
- - - - - --0 Transparent Bit (T-BIT) : 0h
0000100- Message Discriminator (MD) : 4h = Dedicated Channel
Management Messages (DCM)
********GSM 08.58 – DCM (V 6.2.0) (GSM0858_DCM)
******** SACCH INFO MODIFY (SACCH_INFO_MODIFY)
******** Channel Number (CHA_NO)
- - - - -001 Timeslot Number (TN) : 1
01000- - - Channel Type(CHA_TYPE) : 8 = SDCCH/8 + ACCH; Subchannel=0
******** System Information Type (SYS_INFO_TYPE)
00000101 Type (TYPE) : 5h = SYSTEM INFORMATION 5 (5)
********Layer 3 Information (L3_INFO)
********Data (DATA) : 06 1D 00 18……………… 04 84 83h
Вариант 10
******** LAPD128 (LAPD)
******** INFORMATION (I)
- - - - - --0 Address Field Extension Bit (EA) : 0
- - - - - -0- Command-Bit (C) : 0 = command from network to user
000000- - Service access point identifier (SAPI) : 0
-- - - - - -1 Address Field Extension Bit (EA) : 1
0000001- Terminal endpoint identifier (TEI) : 1
1011100 - Send Sequence Number (NS) : 92
- - - - - --0 Point Bit (P) : 0 = no response frame needed
1011011- Send Sequence Number (NS) : 91
********GSM 08.58 – RSL (V 6.2.0) (GSM_0858)
- - - - - --0 Transparent Bit (T-BIT) : 0h
0000001- Message Discriminator (MD) : 1h = Radio Link Layer
Management Messages (RLLM)
******** GSM 08.58 – RLLM (V 6.2.0) (GSM0858_RLLM)
******** ESTABLISH INDICATION (EIND)
******** Channel Number (CHA_NO)
- - - - -001 Timeslot Number (TN) : 1
01000- - - Channel Type(CHA_TYPE) : 8 = SDCCH/8 + ACCH; Subchannel=0
********Link Identifier (LINK_ID)
- - - - -000 Service Access Point Identifier (SAPI) : 0h = SAPI 0 (0)
- -0- - - - - NA (NA) : 0h = applicable for this message
00- - - - - - Channel Type (CHA_TYPE) : 0h = main signaling channel FACCH
or SDCCH (FACCH/SDCCH)
******** Layer 3 Information (L3_INFO)
******** Data (DATA) : 06 27 02 03 33 58 81 08 29 05 21 04 03 10 18
Задание №2.Прикладной протокол ISUP. Функции протокола. Форматы сообщений. Типы сообщений. Параметры сообщений. Расшифровка трейса протокола ISUP.
Цель работы:Расшифровать трейс согласно формата 2 и 3 уровня сигнализации ISUP.
1 Задание к работе:
Согласно варианта расшифровать протокол ISUP для стационарных сетей в формате протоколаISUP (для расшифровки используйте форматы 2 и 3 уровня, представленные в приложении 1)
Вариант 1
18:20:12.968 Port-1 D1-Net L1->L0
LI: L0_Raw_Message
L2: MTP (Whitebook)
1 . . . . . . . : Bwd indicator bit.……………….....01 Hex
. 0101011 :Bwd sequence num....……………...2b Hex
1 . . . . . . . : Fwd indicator bit...………………....01 Hex
. 0101000 :Fwd sequence num....……………....28 Hex
00 . . . . . . : Spare...............……………………..Ok
. . 001001 : Length Indicator.....………………..9 Dec
10 . . . . . . : Network Indicator..………………..National network
. . 00 . . . . : Spare................…………………….Ok
. . . . 0101 : Service Indicator...…………………ISDN User Part
******** : DPC..................……………………00-6-00-1
******** : OPC..................……………………00-0-08-1
0010 . . . . : SLS.................……………………..2 Dec
L3: ISUP (Whitebook)
00000010 : Circuit id.........……………………..02 Hex
0000 . . . . : Spare................…………………….Ok
. . . . 0000 : Circuit id (lower)...…………………00 Hex
00001001 : Message type.........……………….ANM-answer
00000000 : Pointer..............…………………..0 Dec
Вариант 2
MTP2: Q.7 03 White book
.1111100 Backward sequence number............................. 124 Dec
-- Parameter Compatibility Information
00101101 Upgraded parameter.................................... Call History Information
-- Instruction indicators
0 Transit at intermediate............................... Transit interpretation
....................... 0. Release call Ind............................... Don't release call
..................... 0.. Send notification Ind....................... Don't send notification
. . . .0. . . Discard message........................................... Don't discard message
. . .0. . . . Discard parameter........................................ Don't discard parameter
.10...................... Pass on not possible ind................. Discard parameter
1......................... Extension........................................ Last octet
20 00000000 Optional parameter................................. End Of Optional Parameters
Вариант 3
МТР2: Q.703 White book
.0101100 Backward sequence number 44 Dec
Элементы оглавления не найдены.
.00........................... Coding standard................................... CCITT standardized coding
1.............................. Extension.............................................. Last octet
.0010000 Cause value............................................................ Normal call clearing
1................................ Extension................................................ Last octet
Вариант 4
00000001 : Message type........………………………….IAM-Initial address
--Nature of connection ind
000 . . . . . : Spare..............……………………………...00 Hex
. . . 0 . . . . : Echo control device………………………..Not included
. . . . 00 . . : Continuity check..………………………....Not required
. . . . . . 00 : Satellite.........……………………………....None in the connection
--Forward call inds
01 . . . . . . : ISUP preference..………………………....Not required all the way
. . 1 . . . . . : ISUP part…………………………............Used all the way
. . . 0 . . . . : ETE info.........…………………………....None avail
. . . . 0 . . . : Interworking....………………………......None encountered
. . . . . 00 . : ETE method........………………………...No ETE avail
. . . . . . . 0 : Call type.........…………………………….National
0000 . . . . : Reserved (nad use)……………………..…00 Hex
. . . . 0 . . . : Spare............……………………………...00 Hex
. . . . . 00 . : SCCP method......………………………...No indication
. . . . . . . 0 : ISDN access........………………………..Originating access non-ISDN
--Calling party cat
00001010 : Category..........…………………………..Original calling subscriber
--Tx medium requirement
00000011 :Tx medium.........………………………..3.1 kHz audio
00000010 : Pointer..........…………………………....2 Dec
00001001 : Pointer...........…………………………..9 Dec
--Called party nr
00000111 : Length..............………………………...7 De
0 . . . . . . . : Odd/Even ind......……………………...Even
. 0000011 : Nature of addrind...……………………National (significant) nr
1 . . . . . . . : INN ind.............………………………..Routing to INN not allowed
. 001 . . . . : Numbering plan.......…………………..ISDN (telephony)
. . . . 0000 : Spare.............……………………….....Ok
******** : Address signal.......…………………….0957491157
00001010 : Optional para.......……………………..Calling party number
--Call party number
00000101 : Length..............………………………..5 Dec
0 . . . . . . . : Odd/Even ind.........……………………Even
. 0000011 : Nature of addr.......…………………….National (significant) nr
0 . . . . . . . : NI indicator.........……………………...Nr complete
. 001 . . . . : Numbering plan.......…………………..ISDN (telephony)
. . . . 00 . . : Presentation.........……………………..Allowed
. . . . . . 11 : Screening..........…………………….....Net provided
******** : Address signal.......……………………458002
00000000 : Optional para......……………………...End
Вариант 5
1 . . . . . . . : Bwd indicator bit…………………....01 Hex
. 0101011 :Bwd sequence num...………………..2b Hex
1 . . . . . . . : Fwd indicator bit..…………………..01 Hex
. 0100111 :Fwd sequence num....…………….…27 Hex
00 . . . . . . : Spare..............……………………….Ok
. . 011011 : Length Indicator....…………………11 Dec
10 . . . . . . : Network Indicator...………………...National network
. . 00 . . . . : Spare............……………………......Ok
. . . . 0101 : Service Indicator.…………………...ISDN User Part
******** : DPC...............……………………….00-6-00-1
******** : OPC.................……………………..00-0-08-1
0010 . . . . : SLS................……………………….2 Dec
00000010 : Circuit id.........……………………....02 Hex
0000 . . . . : Spare..............…………………….....Ok
. . . . 0000 : Circuit id (lower)...………………….00 Hex
00000110 : Message type.........…………………ACM-Address complete
--Backward call inds
00 . . . . . . : ETE method.…………………..........No ETE avail
. . 01 . . . . : Сalled party cat.....………………… Ordinary subscriber
. . . . 01 . . : Called party status…………………..Subscriber free
. . . . . . 10 : Charge ind...........…………………...Charge
00 . . . . . . : SCCP method avail....………………No indication
. . 0 . . . . . : Echo control device..……………….Not included
. . . 0 . . . . : ISDN access..........…………………Terminating access non-ISDN
. . . . 0 . . . : Holding..............……………………Not requested
. . . . . 1 . . : ISDN User Part.......…………………ISUP all the way
. . . . . . 0 . : ETE info.............…………………...None avail
. . . . . . . 0 : Interworking........…………………..None encountered
00000000 : Pointer............…………………......0 Dec
Вариант 6
Initial Address
Nature of Connection Indicator (NoCi): 00
- - - - - - 0 0 Satellite Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No satellite circuit the connection
- - - - 0 0 - - Continuity Check Indicator. . . . . . . . . . . . . . . . . . . . . . . . . .Continuity check not
required
- - - 0 - - - - Echo Control Device Indicator . . . . . . . . . . . . . . . . . . . . . . Outgoing half echo control device not included
0 0 0 - - - - - Spare
Forward Call Indicator (FCi): 0060
- - - - - - - 0 National / International Indicator. . . . . . . . . . . . . . . . . . . . .Call to be treated as a
national call
- - - - - 0 0 - End-to-End Method Indicator . . . . . . . . . . . . . . . . . . . . .. .No end-to-end method
available ( only link-by-link method available)
- - - - 0 - - - Interworking Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . .No interworking
encountered (No. 7 signal ling all the way)
- - - 0 - - - - End-to-End Information Indicator . . . . . . . . . . . . . . . . . . . . .No end-to-end
information available
- - 1 - - - - - ISDN-UP Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . .ISDN-UP used all the way
0 1 - - - - - - ISDN-UP Preference Indicator. . . . . . . . . . . . . . . . . . .ISDN-UP not required all
the way
- - - - - - - 0 ISDN Access Indicator . . . . . . . . . . . . . . . . . . . . . . . . . .Originating access non-
ISDN
0000 0 - - - Spare
Calling Party Category (CgPC) : 0A
0000 1010 Calling Party Category. . . . . . . . . . . . . . . . . . . . . . . . . . . . Ordinary calling subscriber
Transmission Medium Requirement (TMR) : 03
0000 0011 TMR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,1 kHz audio
Mandatory Variable Parameters
===================== =
Position :02
Length :08
ID= 04 , Called Party Number
--------------------------------------
Called Party Number (CdPA) :83
-000 0011 Nature of Address Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . National (significant)
number
1- - - - - - - Odd/Even Indicator (O/E) . . . . . . . . . . . . . . . . . . . . . . . . . . .Odd number of address
signals
Called Party Number (CdPA) :90
- - - - 0000 Spare
- 001 - - - - Numbering Plan Indicator . . . . . . . . . . . . . . . . . . . . . . . . . ISDN(Telephony)
numbering plan (E. 164/ E.163)
1 - - - - - - -Internal Network Number Indicator (INNi). . . . .. . . . . . . . Routing to internal
network number not allowed
Called Party Number (CdPA) :24
- - - - 0100 Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 4
0010 - - - - Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 2
Called Party Number (CdPA) :21
- - - - 0001 Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 1
0010 - - - - Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 2
Called Party Number (CdPA) :03
- - - - 0011 Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 3
0000 - - - - Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 0
Called Party Number (CdPA) :38
- - - - 1000 Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 8
0011 - - - - Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 3
Called Party Number (CdPA) :98
- - - - 1000 Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 8
1001 - - - - Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 9
Called Party Number (CdPA) :0F
- - - - 1111 Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ST
0000 - - - - Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 0
Optional variable Parameter
================= ==
ID = 31 , Propagation Delay Counter
---------------------------------------------
Length
Propagation Delay Counter (ProDeC): 0000
BIT 1-16 = Propagation Delay Value (ms)
ID = 0A , Calling Party Number
--------------------------------------
Length : 06
Calling Party Number (CgPN) : 03
- 000 0011 Nature of Address Indicator . . . . . . . . . . . . . . . . . . . . . . .National (significant)
number
0 - - - - - - - Odd/Even Indicator (O/E) . . . . . . . . . . . . . . . . . . . . . . .Even number of address
signals
Calling Party Number (CgPN) :13
- - - - - - 11 Screening Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . Network provided
- - - - 00 - - Address Presentation Restricted Indicator . . . . . . . . . . . Presentation
allowed
-001 - - - - Numbering Plan Indicator. . . . . . . . . . . . . . . . . . . . . . . . .ISDN (Telefony)
numbering plan (E.164/E.163)
0- - - - - - - Calling Party Address Incomplete Indicator (CgPAIn.i) . . . . . . . . . . . . . . .
complete
Calling Party Number (cGpn) :34
- - - - 0100 Address Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Digit 4
0011 - - - - Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 3
Calling Party Number (cGpn) :00
- - - - 0000 Address Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Digit 0
0000 - - - - Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 0
Calling Party Number (cGpn) :42
- - - - 0010 Address Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Digit 2
0100 - - - - Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 4
Calling Party Number (cGpn) :72
- - - - 0010 Address Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Digit 2
0111 - - - - Address Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digit 7
END OF Optional variable Parameter
Вариант 7
Трейс IAM
MTP2: Q.703 Whitebook
*0011010 Backward sequence number 26 Dec
1******* Backward indicator bit 1 Dec
*0010111 Forward sequence number 23 Dec
1******* Forward indicator bit 1 Dec
**101010 Length indicator 42 Dec
00****** Spare Spare
MTP3: Russian specifications
****0101 Service indicator ISDN User Part
**00**** Spare 0 Dec
11****** Network Indicator Local or zone network
***bl4 ** Destination point code 15360 Dec
***bl4 ** Originating point code 1 Dec
1011**** Signaling link selection 11 Dec
ISUP-R-2000: Russian specifications
***bl2 ** Circuit identification code 1355 Dec
0000**** Spare 0 Dec
00000001 Message Type INITIAL ADDRESS IAM
--- Nature of connection indicators
*******0 Satellite ind No satellite indicator
****000* Continuity check ind Not required
***0**** Echo control devices Not included
000**** Spare 0 Dec
--- Forward call indicators
*******0 National/International Irid National call
*****00* End-to-end method ind No method available
****0*** Interworking ind Not encountered
***0**** End-to-end info ind Not available
**1***** ISDN user part ind Used all the way
00****** ISUP preference ind Preferred all the way
*******1 ISDN accessind Originating access ISDN
*****00* SCCP method ind No indication
00000*** Spare 0 Dec
--- Calling Party’s Category
00001010 Category Ordinary calling sub.cat. 1
--- Transmission medium requirement
00000011 Transmission medium req 3.1 kHz audio
00000010 Pointer 2 Dec
00001000 Pointer 8 Dec
00000110 Length 6 Dec
--- Called Party Number
*0000001 Nature of address ind Subscriber number
0******* Odd/even ind Even
****0000 Spare 0 Dec
*001**** Numbering plan ind ISDN (Telephony)
1******* Internal network number ind Routing not allowed
***B4*** Address signal 9238600F
00001010 Optional parameter Calling Party Number
00000110 Length 6 Dec
--- Calling Party Number
*0000001 Nature of address ind Subscriber number
1******* Odd/even Odd
******00 Screeningind Reserved for national use
****00** Presentation restricted ind Presentation allowed
*001**** Numbering plan ind ISDN (Telephony)
0******* Calling PN incomplete ind Complete
***b28** Address signal 7457123
0000**** Filler 0 Hex
00000011 Optional parameter Access Transport
00000100 Length 4 Dec
--- Access Transport
***B4*** Information elements 1E 02 85 93
00011101 Optional parameter User Service Information
00000011 Length 4 Dec
--- User Service Info
***10000 Info transfer capability 3.1 kHz audio
*00***** Coding standard CCITT standardized coding
1******* Extension Last octet
***10000 Information transfer rate 64kbit/s
*00***** Transfer mode Circuit mode
1******* Extension Last octet
***00011 User info layer’s 1 protocol Rec. G.711 A-law
*01***** Layer ID Layer 1
1******* Extension Last octet
00000000 Optional parameter End of Optional parameters
Вариант 8
Трейс АСМ
MTP2: Q.703 Whitebook
*1111100 Backward sequence number 124 Dec
0******* Backward indicator bit 0 Dec
*0110000 Forward sequence number 49 Dec
1******* Forward indicator bit 1 Dec
**001011 Length indicator 18 Dec
00****** Spare Spare
MTP3: Russian specifications
****0101 Service indicator ISDN User Part
**00**** Spare 0 Dec
11****** Network Indicator Local or zone network
***bl4 ** Destination point code 1 Dec
***bl4 ** Originating point code 15360 Dec
1010**** Signaling link selection 10 Dec
ISUP-R-2000: Russian specifications
***bl2 ** Circuit identification code 1514 Dec
0000**** Spare 0 Dec
00000110 Message Type ADDRESS COMPLETE
--- Backward Call Indicators
******00 Charge ind No indication
****00** Called party s status ind No indication
**00**** Called party s category ind No indication
00****** End-to-end method ind No method available
*******1 Interworking ind Encountered
******0* End-to-end info ind Not available
*****0** ISDN user part ind Not used all the way
****0*** Holding ind Not requested
***0**** ISDN access ind Terminating access non-ISDN
**0***** Echo control device Not included
00****** SCCP method ind No indication
00000000 Pointer 0 Dec
Вариант 9
2.1.3 Трейс ANM
MTP2: Q.703 Whitebook
*1111100 Backward sequence number 124 Dec
0******* Backward indicator bit 0 Dec
*0110000 Forward sequence number 48 Dec
1******* Forward indicator bit 1 Dec
**010010 Length indicator 18 Dec
00****** Spare Spare
MTP3: Russian specifications
****0101 Service indicator ISDN User Part
**00**** Spare 0 Dec
11****** Network Indicator Local or zone network
***bl4 ** Destination point code 1 Dec
***bl4 ** Originating point code 15360 Dec
1110**** Signaling link selection 14 Dec
ISUP-R-2000: Russian specifications, 2001
***bl2 ** Circuit identification code 1134 Dec
0000**** Spare 0 Dec
00001001 Message Type ANSWER
00000001 Pointer 1 Dec
00101101 Optional parameter Call History Information
00000010 Length 2 Dec
--- Call History Information
***b16** Propagation delay value 0 Dec
00111001 Optional parameter Param Compatibility Info
00000010 Length 2 Dec
--- Parameter Compatibility Information
00101101 Upgraded parameter Call History Information
--- Instruction indicators
*******0 Transit at intermediate Transit interpretation
******0* Release call Ind Don’t release call
*****0** Send notification Ind Don’t send notification
****0*** Discard message Don’t discard message
***0**** Discard parameter Don’t discard parameter
*10***** Pass on not possible Ind Discard parameter
1******* Extension Last octet
Вариант 10
Трейс RЕL
MTP2: Q.703 White book
*0101100 Backward sequence number 44 Dec
1******* Backward indicator bit 1 Dec
*1111100 Forward sequence number 124 Dec
0******* Forward indicator bit 0 Dec
**001101 Length indicator 13 Dec
00****** Spare Spare
MTP3: Russian specifications
****0101 Service indicator ISDN User Part
**00**** Spare 0 Dec
11****** Network Indicator Local or zone network
***bl4 ** Destination point code 15360 Dec
***bl4 ** Originating point code 1 Dec
1110**** Signaling link selection 14 Dec
ISUP-R-2000: Russian specifications
***bl2 ** Circuit identification code 1886 Dec
0000**** Spare 0 Dec
00001100 Message Type RELEASE
00000010 Pointer 2 Dec
00000011 Pointer 0 Dec
00000011 Length 2 Dec
--- Cause indicators
****0000 Upgraded parameter User
***0**** Spare 0 Dec
*00***** Coding standard CCITT standardized coding
1******* Extension Last octet
*0010000 Discard message Normal call clearing
1******* Extension Lastoctet