Department of Metals Science, Equipment and Technology of Thermal Treatment (ФТ)

Модуля

Англійська мова для науковців -1

для студентів 5 курсу ІФФ

Department of Foundry of Ferrous and Non-ferrous Metals

(ФЛ)

1. Furnaces

2. Properties of Liquid Metals and Alloys

3. Interaction of Liquid Metals and Gases

4. Gases in Castings and Degassing of Melts

5. Metal Flow in Moulds

6. Thermodynamics of Crystallization Process

7. Crystallization of Metal Castings

8. Linear and Volumetric Shrinkage of Castings

9. Inner Strains, Deformation and Cracks in Castings

10. Castings Quality and Stages of Its Formation

11. Jewelry Casting Technology

12. Control of Cast Metal Homogeneity

13. Production of Tight Riserless Aluminium Alloy Castings

14. Formation of Aluminium Alloy Castings

15. High Chromium Alloys

16. Sand Mold Technology

17. New Binders and their Properties

18. Lost Foam Casting

19. Roll Casting

20. Advanced Precision Casting Production Technologies

Department of Physical and Chemical Fundamentals of the Metal Technology

(ФС)

1. Stoves

2. Steel Production by Bessemer Process

3. Open-hearth Production of Steel

4. Vacuum Remelting

5. Electroslag Technology

6. Plasma Technology

7. Electron-Beam Technology

8. Out-off-Furnace Treatment of Alloys

9. Vacuum-Induction Melting

10. Plasma-Arc Melting. Plasma-Induction Melting

11. Crystallization of Metals in Ingot Moulds

12. Gases in Alloys

13. Electromagnetic Treatment of Alloys

14. Production of Cast Composites

15. Development of a Technology for Remelting Chips and Small Waste of Nonferrous Casting Production

16. Refining, Inoculation and Microalloying of Alloys

17. Development of Copper-based Alloys with Shape Memory Effect

18. Investigations in Hydrogen and Nitrogen Content in Melts

19. Cast Iron De-gasing

20. Casting of Aluminium Alloys

Department of Physics of Metals

(ФМ)

1. Materials Science. Solid State Physics.

2. Materials in extreme states (Nanostructured Materials, Thin Films, Quasicrystals…)

3. New Developments in Nanotechnology Research

4. Nanocomposite Materials Formed by Ion Implantation

5. Superconducting MgB2 Nanowires

6. Sol-Gel Nanocoating

7. Influence of the microstructure on the properties of steel.

8. Microstructure examination. Electron microscopy.

9. Computer Simulation in Material Science.

10. Nanostructured Organic-Inorganic Hybrid Materials

11. The Effect of Compositions and Microstructure on Dielectric Properties

12. Tetragonal Zirconia Polycrystals

13. Titanium Nitride and Titanium Diboride-based Composites

14. Thin Film Prepared by Metallographic Chemical Vapour Deposition

15. Si-based Non Oxide Ceramics

16. Microstructural Aspects of the Self-propagating High Temperature Synthesis of Hexagonal Barium Ferrites in an External Magnetic Field

17. Electrochemical Deposition of Yttrium Oxide

18. Low Cost Composites Made of Oxides and Nitrides

19. Material Science of Mg-Ni-based Hybrides

20. Hydrogen storage using carbon adsorbents

Department of Metals Science, Equipment and Technology of Thermal Treatment (ФТ)

1. Heat Treatment (Heating of Steels, Oxidation and Decarburisation on Heating, Annealing, Normalising, Hardening, Tempering).

2. Case-Hardening (Carburizing, Nitriding, Cyaniding, Calorising, Sulphiding, Cleaning of Articles after Heat-Treatment).

3. Quality Control of Metals.

4. Crystallization of Metals and Cast Alloys Structure.

5. Influence of the Microstructure on the Properties of Steel.

6. Modifying of Non-Ferrous Alloys (Cu- and Al- Based Alloys).

7. Computer Materials Science.

8. Plastic Deformation (Recrystallization)

9. Heat-treatment of Cast Iron.

10. Heat-treatment of Non-ferrous Metals.

11. Equipment, Fuel and Accessory Materials for Heat-treatment Shop

12. Automatic Equipment for Express control of the Composition and Properties of Metals

13. Hard Materials in the System Ta-C-B

14. Predicting the Life of High-Temperature Structural Components in Power Plants

15. Hardness

16. Heat Treatment of Steel

17. Modifying of Non-Ferrous Alloys (Cu- and Al- Based Alloys)

18. Nonequilibrium Vacancy-stimulated Diffusion (induced diffusion)

19. Phases in Metal Alloys

20. Properties of Materials Dealt with in Heat-treatment of Metals

Наши рекомендации